Performance

1050R

Net Power (kW) 33.1 hp (24.7)
Maximum Torque (Nm) 80 ft. - lbs. (108)
Rated Operating Capacity (kg) 1,050 lbs. (476)





Operator's Cab

The 1050R features a new, state-of-the-art, fully-adjustable operator's cab.

1050R

 

  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
  • Hydraloc System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.

Controls

Joystick Controls

  • Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
  • Two control options include T-Bar or Hand/Foot.
  • All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
  • Hydralocsystem applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

The 1050R is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.

1050R

Make: Yanmar Model: 3TNV88C-KMS Tier IV
Net Power (kW) @ rpm 33.1 hp (24.7) @ 2800
Maximum Torque (Nm) @ rpm 80 ft.-lbs. (108) @ 1680
Displacement (L) 100 cu.in. (1.6)






  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology.

Hydraulics

The 1050R has amped-up hydraulic systems which incorporate intuitive design for precise controllability.

1050R Cows

Auxiliary Hydraulics - Standard (L/min) 14.5 gpm (55)
High-Flow Auxiliary Hydraulics - Option (L/min) N/A
Reservoir Capacity (L) 8 gal. (30.3)






  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.

Liftarm

The 1050R features an all-new low-profile lift arm.

1050R Dirt

  • 42% more visibility with new low-profile lift arm.
  • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.

Serviceability

Excellent service access and quality components pair up to provide durable machines that are easy to maintain.

1050R

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS

Attachments

Check out our full line of attachment at Edge Attach!

Options

Operator Station


Standard Optional
Adjustable Arm Rests / Control Towers

Heating

Air Conditioning

High-Back Adjustable Seat

Cab Enclosure

  Standard Optional
Suspension Seat - Mechanical

Suspension Seat - Air Ride

Foot and Hand Throttles

Full Instrumentation

Horn

  Standard Optional
Integral Access Plate (removable)

Operator Restraint Bar

ROPS/FOPS Level II Overhead Guard

Sound Reduction Material

Work Lights - Front and Rear

Performance


Standard Optional
All-Tech® Attachment Mounting System

Power-A-Tach® Attachment Mounting System

Anti-Vandalism Protection

Back-up Alarm

  Standard Optional
Brake Control (Auto/Manual)

Counterweight

HydraglideTM Ride Control

HydralocTM Safety System

  Standard Optional
Hydrastatic Drive

Lift Arm Support Device

Switchable Self-Leveling Hydraulic Lift Action

Two-Speed Drive

Controls


Standard Optional
Hands-Only

Dual-Hand Controls

Hand/Foot Controls

Joystick Controls

Engine


Standard Optional
Engine Auto-Shutdown System

Engine Block Heater

Turbo-Charged Engine

Hydraulics


Standard Optional
Auxiliary Hydraulics

High-Flow Auxiliary Hydraulics

Specifications

Dimensions
A. Overall Operating Height - Fully Raised (mm) 139.6" (3546)
B. Height to Hinge Pin - Fully Raised (mm) 107.5" (2731)
C. Overall Height to top of ROPS (mm) 70.3" (1786)
D. Ground Clearance to Chassis (mm) 6.0" (152)
E. Overall Length with 55" Bucket (mm) 114" (2896)
F. Overall Length Less Bucket (mm) 88.9" (2258)
G. Wheelbase (mm) 34.5" (876)
H. Dump Reach at Full Height (mm) 22.8" (579)
I. Rollback at Ground Level 29°
J. Dump Angle 42°
K. Overall Width - Less Bucket (mm) 48.4" (1229)
L. Bucket Width (mm) 55" (1404)
M. Clearance Circle - Rear (mm) 54.1" (1374)
N. Clearance Circle - Front w/o Bucket (mm) 44.1" (1120)
O. Clearance Circle - Front w/Bucket (mm) 69.4" (1763)
P. Seat to Ground Height (mm) 32.6" (828)
Q. Rollback at Full Height 99°
R. Dump Height (mm) 84.5" (2146)
S. Departure Angle 26°
Standard Tire Size 27x8.5x15 HD
Engine
Make Yanmar
Model 3TNV88C-KMS Tier IV
Gross Power (kW) @ 2800 rpm 34.7 hp (25.5)
Net Power (kW) @ 2800 rpm     33.1 hp (24.7)
Maximum Torque (Nm) @ 1820 rpm 80.7 ft.-lbs. (109.4)
Displacement (L) 100 cu. in. (1.6)
Hydraulics
Auxiliary Hydraulics - Standard (L/min) 14.5 gpm (55)
High-Flow Hydraulics - Optional (L/min) N/A
Reservoir Capacity (L) 8 gal. (30.3)
Electrical
Battery (CCA) 12-volt (950)
Starter (kW) 12-volt (3.0)
Alternator 40-amp
Capacities/Weight
Rated Operating Capacity (kg) 1,050 lbs. (476)
With optional counterweight (kg) 1,175 lbs. (533)
Fuel Tank (L) 10.4 gal. (39.4)
Travel Speed - Maximum (km/hr) 5.9 mph (9.5)
Operating Weight - Approximate (kg) 4,200 lbs. (1905)
R-Series_SpecDiagram